Modelling bits for 3d printing

[Malika]

Two new items...

40mm round bases, perfect for your Questoris Knights!

https://cults3d.com/en/3d-model/game/40mm-round-bases-for-6mm-8mm-miniatures-tech-shanty-texture

Gatling Cannons designed to be mounted on the Cerastus Knight arms:

https://cults3d.com/en/3d-model/game/gatling-cannons-compatible-with-the-at18-cerastus-knight

[Malika]

Finally got my 32mm bases ready!

STL's here: https://cults3d.com/en/3d-model/game/32mm-round-bases-for-6mm-8mm-miniatures-tech-shanty-texture

Designed for various scifi 6mm / 8mm scaled tabletop wargames, these bases are perfect for mounting cavalry, light vehicles, or objectives.

Not counting the many details, these bases are about 2.25mm thick.

This kit contains the following parts:
- 10x 32mm diameter round bases
- 10x 32mm diameter round bases with 4x holes of 6.10mm
- 40x 5.80mm diameter inserts for holes in the bases (texture matching the base)
- 40x 5.80mm diameter inserts for holes in the bases (matching texture + additional details bits on top)

Please do not share or sell these files (including prints and remixes) without my written permission.

Note that the final picture with the Squid Drones and Warbikes on top only shows what can be done with these bases. Squid Drones and Warbikes are not included in this kit!

[Malika]

Just released these...


Close Combat Brutes




https://cults3d.com/en/3d-model/game/smallscale-close-combat-brutes

Designed for 6mm/8mm gaming in mind. Compatible with games such as Adeptus Titanicus or Battletech.

This kit contains the following miniatures:
- 10 Close Combat Brutes (with 6mm inserts)
- 10 Close Combat Brutes (without 6mm inserts)

*NOTE: 25mm round bases on picture not included in this set, they are available separately though! *

Please do no share or sell these files (including prints and remixes) without my written permission.

[Malika]

After several requests I've decided to also do a modular version of my previously released Beta Hab Blocks.

The Beta Hab Blocks are designed for 6mm / 8mm gaming, think of games such as Battletech, Adeptus Titanicus, or Epic.

This kit is basically a modular version of the previous Beta Hab Blocks I've released. It consists of the following parts:
- 4 entrance components
- 7 level components
- 7 roof components

Please do no share or sell these files (including prints and remixes) without my written permission.

Note that the final picture with the infantry on the roofs only shows how 25mm round bases can fit on the roofs. Infantry and bases not included in this kit.

STL's available here: https://cults3d.com/en/3d-model/game/beta-hab-blocks-modular-kit

[Malika]

Another day, another release! Flamethrowers!

https://cults3d.com/en/3d-model/game/smallscale-flame-troopers

Designed for 6mm/8mm gaming in mind. Compatible with games such as Adeptus Titanicus or Battletech.

This kit contains the following miniatures:
- 10 Flame Troopers (with 6mm inserts)
- 10 Flame Troopers (without 6mm inserts)

*NOTE: 25mm round bases on picture not included in this set, they are available separately though! *

Please do no share or sell these files (including prints and remixes) without my written permission.

[Malika]

Another day, another release!

Alpha Hab Block One:

https://cults3d.com/en/3d-model/game/alpha-hab-block-one

The Alpha Hab Block One is designed for 6mm/8mm gaming, but it could probably be upscaled for 10mm and 15mm scaled gaming as well. This makes the Alpha Hab Tower suitable for games such as Adeptus Titanicus, Dropzone Commander, or Battletech.

The kit contains both single piece as two piece (separate roof) versions of the building.
- 4 single piece Alpha Hab Block One (which each of the 4 roof types)
- 4 separate roofs
- walls put together as a single piece

The dimensions of the buildings are 62.4mm deep and 66.8mm wide. The heights vary (depending on the roof type), but the "walkable" part of the roof is 67.6mm tall.

Note that the final picture with the infantry base only shows how 25mm round based infantry look on and next to the building. Infantry and bases are not included in this kit.

Please do no share or sell these files (including prints and remixes) without my written permission.

[Malika]

Another Alpha Hab Block building? That's right!

ALPHA HAB BLOCK TWO!

https://cults3d.com/en/3d-model/game/alpha-hab-block-two

The Alpha Hab Block Two is designed for 6mm/8mm gaming, but it could probably be upscaled for 10mm and 15mm scaled gaming as well. This makes the Alpha Hab Block suitable for games such as Adeptus Titanicus, Dropzone Commander, or Battletech.

The kit contains both single piece as two piece (separate roof) versions of the building.
- 3 single piece Alpha Hab Block Two (which each of the 3 roof types)
- 3 separate roofs
- walls put together as a single piece

The dimensions of the buildings are 77.64mm deep and 65.67mm wide. The heights vary (depending on the roof type), but the "walkable" part of the roof is 83.12mm tall.

Note that the final picture with the infantry base only shows how 25mm round based infantry look on and next to the building. Infantry and bases are not included in this kit.

Please do no share or sell these files (including prints and remixes) without my written permission.

[Malika]

Another day, and some new (modular) buildings are out! You can basically stack them up as short or tall as you want, depending on how many level components you wanna print out and cram in there.

Alpha Hab Block Three:
https://cults3d.com/en/3d-model/game/alpha-hab-block-three-modular

The Alpha Hab Blocks are designed for 6mm / 8mm gaming, think of games such as Battletech, Adeptus Titanicus, or Epic.

It consists of the following parts:
- 1 entrance component
- 1 level component
- 3 roof components

Delta Hab Block One:
https://cults3d.com/en/3d-model/game/delta-hab-block-one-modular

The Delta Hab Blocks are designed for 6mm / 8mm gaming, think of games such as Battletech, Adeptus Titanicus, or Epic.

It consists of the following parts:
- 1 entrance component
- 1 level component
- 1 roof component

Delta Hab Block Two:
https://cults3d.com/en/3d-model/game/delta-hab-block-two-modular

The Delta Hab Blocks are designed for 6mm / 8mm gaming, think of games such as Battletech, Adeptus Titanicus, or Epic.

It consists of the following parts:
- 1 entrance component
- 1 level component
- 1 roof component

Beta Hab Tower:
https://cults3d.com/en/3d-model/game/beta-hab-tower-modular

The Beta Hab Tower is designed for 6mm / 8mm gaming, think of games such as Battletech, Adeptus Titanicus, or Epic.

It consists of the following parts:
- 1 entrance component
- 1 level (single) component
- 1 level (triple) component
- 1 roof component

[Malika]

Started working on the 'interior' of the main ship, still needs quite some work. But you're getting the idea. Also added some extra details on the main ship's super structure. Don't wanna put too much detailing on there since I want folks to be able to add all sorts of funky markings on it. And, the landing pod has gotten some additional side thrusters. The crudely kitbashed 54mm tall Drifters are just added for scaling purposes. I'm already pondering a bit about landing gears for the pod.

[Malika]

Finally finished this one, and just had to release it!

The 804-R class tracked transport, also known as the 'Boar', can now be downloaded from my Cults3d.
STL's here: https://cults3d.com/en/3d-model/game/boar-class-tracked-transport

[Malika]

Just released these ones on Cults3d, thought you might appreciate some rubble!

STL's here: https://cults3d.com/en/3d-model/game/smallscale-piles-of-rubble

[Malika]

Another day, another vehicle!

https://cults3d.com/en/3d-model/game/goat-class-tracked-transport

[Malika]

Did some more Cerastus Knight compatible weapons. This time: Volkite and Plasma!




STL's here: https://cults3d.com/en/design-collections/BitsBlitzDesigns/adeptus-titanicus-compatible

[Malika]

Something a little bit different this time!

Lately I've been getting a bit obsesses with the Turnip28 universe by Max FitzGerald. How to describe it? It's basically Napoleonic warfare and aesthetics, but with a heavy dose of root vegetables! It involves a lot of kitbashing, which I adore! A spinoff of the main Turnip28 game is Scabz, which takes place in Swill. Which is still in that same universe, but has a more Victorian London vibe but then with lots of cigarettes and dudes dressing up as fish. Scabz allows players to kitbash their ships (preferable using cans of fish as a basis). Check it out here.

However, since I am such a sucker for "epic scale" (6mm, 8mm, whatever!)...I wanted to design a sardine can ship for that scale. So rather than a small craft, this (digital) sardine can is practically a warship, which has been christened: the Ironmonger!

STL available here: https://cults3d.com/en/3d-model/game/pocket-scabz-ironmonger

The ship is about 118mm long by 51mm wide (not counting the cannons sticking out) by 54mm tall.

[Malika]

Two more releases!

Wardens:

https://cults3d.com/en/3d-model/game/smallscale-wardens-close-combat

Amaroks:

https://cults3d.com/en/3d-model/game/smallscale-robotic-amaroks